7.874 Inch | 200 Millimeter x 12.205 Inch | 310 Millimeter x 2.008 Inch | 51 Millimeter CONSOLIDATED BEARING NU-1040 M Cylindrical Roller BearingsProduct Identifiers
| Infection on Soil | Physiological Neutral | Chemical Character | Chemical Neutral | Release Type | Quick |
| Einecs No. | 235-186-4 | Delivery Time | Shipped in 7 Days After Payment | Trademark | Chunchi |
| Transport Package | Bags | Specification | 99.5% | Origin | China |
| HS Code | 282710100 |
| Mass lock washer | 0.22 kg |
| d | 200 mm |
| M | 194 mm |
| d2 | 245 mm |
| B | 2.5 mm |
| f | 20 mm |
| d1 | 222 mm |
What is7.874 Inch | 200 Millimeter x 12.205 Inch | 310 Millimeter x 2.008 Inch | 51 Millimeter CONSOLIDATED BEARING NU-1040 M Cylindrical Roller Bearings in mechanical engineering?
Oil level, min.:48 mm; L:560 mm; Appropriate attachment bolt, size G:24 mm; P55°:2700 kN; P120°:1000 kN; Ca:124 mm; H1:190 mm; Oil level, max.:61 mm; Q180°:900 kN; A2:255 mm;
Read More ...
L:711.2 mm; H2:79.375 mm; Appropriate attachment bolt size G:1.25 in; A1:190.5 mm; R2:42.069 mm; Cap bolt recommended tightening torque:1735.4 N·m; ba:78.581 mm; Housing:SAFS 538; S:4.763 mm; P150°:136 kN;
Read More ...
h:43.656 mm; End plug (suffix Y):EPR 18; da:147.637 mm; Taconite seal:TER 138; H1:152.4 mm; Mass pillow block:63.9 kg; J max.:441.325 mm; Pa:34 kN; L:511.175 mm; J min.:396.875 mm;
Read More ...
Fillet Radius ra:3.00 mm; d:110.000 mm; Sealed Speed Rating n3:1500 rpm; Oil Speed Rating Open/Shielded n2:2600 rpm; Basic Dynamic Radial Load Rating C:270000 N; Basic Static Radial Load Rating Co:260000 N; B:70.00 mm; D:320.0000 mm; Grease Speed Rating Open/Shielded n1:2100 rpm; Accessories:Two Sea
Read More ...
R1:95.25 mm; P180°:96.1 kN; N1:28.575 mm; da:136.525 mm; Cap bolt:4 x 3/4-10 UNC; S:4.763 mm; R2:39.688 mm; L:539.75 mm; RG:3/4 NPT; Max. speed for Taconite seal:590 r/min;
Read More ...
K:4 mm; Calculation factor kr:0.2; Basic dynamic load rating C:297 kN; B:45 mm; Reference speed:1200 r/min; Basic static load rating C0:695 kN; E:214.1 mm; D:225 mm; Limiting speed:1500 r/min; ra max.:1 mm;
Read More ...
RG:3/8 NPT; J min.:431.8 mm; Appropriate attachment bolt size G:1 in; ba:77.787 mm; P90°:138 kN; PG:1/4 NPT; End plug (suffix Y):EPR 16; Taconite seal:TER 127; Cap bolt, SAE grade:5; Mass pillow block:92.5 kg;
Read More ...
d:40.000 mm; B:15.00 mm; Oil Speed Rating n2:12000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:14600 N; Grease Speed Rating n1:9500 rpm; D:68.0000 mm; Fillet Radius rb:0.30 mm; Basic Dynamic Radial Load Rating C:19500 N;
Read More ...
Taconite seal:TER 138; J min.:492.125 mm; RG:3/4 NPT; R2:37.306 mm; Appropriate attachment bolt size G:1 in; H:360.363 mm; Cap bolt:4 x 3/4-10 UNC; P120°:85.9 kN; P180°:92.5 kN; A1:171.45 mm;
Read More ...
Accessories:One Shield; B:11.00 mm; d:15.000 mm; Basic Dynamic Radial Load Rating C:8250 N; Oil Speed Rating Open/Shielded n2:20000 rpm; D:35.0000 mm; Grease Speed Rating Open/Shielded n1:16000 rpm; Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:5100 N;
Read More ...
b:22.3 mm; da min.:371 mm; Basic dynamic load rating C:4515 kN; Calculation factor Y0:2.2; G1:35 mm; D1 ≈:524 mm; d2 ≈:418 mm; B:192 mm; r1,2 min.:5 mm; Reference speed:750 r/min;
Read More ...
Grease Speed Rating n1:2800 rpm; B:63.50 mm; Oil Speed Rating n2:3800 rpm; Fillet Radius ra:2.00 mm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:153000 N; Accessories:One Shield; d:70.000 mm; Basic Static Radial Load Rating Co:125000 N; Sealed Speed Rating n3:2800 rpm;
Read More ...
Accessories:One Seal & Snap-Ring; Oil Speed Rating n2:9500 rpm; D:62.0000 mm; Grease Speed Rating n1:7000 rpm; Basic Static Radial Load Rating Co:28000 N; Sealed Speed Rating n3:7000 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:30200 N; B:23.80 mm; d:30.000 mm;
Read More ...
Fatigue load limit Pu:11.4 kN; Calculation factor Y:0.8; Calculation factor Y0:0.45; Ca min.:4 mm; Cb min.:10 mm; Da min.:72 mm; Da max.:86 mm; Basic dynamic load rating C:108 kN; Dimension series:53000; T:30.958 mm;
Read More ...
D:52.0000 mm; Grease Speed Rating n1:8500 rpm; Oil Speed Rating n2:12000 rpm; Basic Dynamic Radial Load Rating C:23800 N; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:20000 N; Sealed Speed Rating n3:8500 rpm; B:22.20 mm; d:20.000 mm; Accessories:One Seal;
Read More ...
| 7.874 Inch | 200 Millimeter x 12.205 Inch | 310 Millimeter x 2.008 Inch | 51 Millimeter CONSOLIDATED BEARING NU-1040 M Cylindrical Roller BearingsCross Reference |
| b | h | s | F | a | T | L | J |
| 7212 BG | 22.3 mm | - | - | - | - | - | - | - |
| 6024 M P/6 C/3 | - | - | - | - | - | - | - | - |
| 6203-ZZNR C/2 | - | - | - | - | - | - | 539.75 mm | - |
| 2216 P/6 C/2 | - | - | - | - | - | - | 560 mm | - |
| 24092 M C/3 | - | - | - | - | - | - | 711.2 mm | - |
| 22209-K | - | - | - | - | - | 30.958 mm | - | - |
| 53326-U | - | - | - | - | - | - | - | - |
| 6221-ZZ C/3 | - | - | - | - | - | - | - | - |
| RCB-5/8-FS | - | - | - | - | - | - | - | - |
| 51116 | - | - | - | - | - | - | - | - |
| NU-2205 | - | - | - | - | - | - | - | - |
| 88508 | - | 43.656 mm | - | - | - | - | 511.175 mm | - |
| 21315E-K | - | - | - | - | - | - | - | - |
| 6014 T P/5 C/2 | - | - | - | - | - | - | - | - |
| RNAO-80 X 100 X 60 | - | - | - | - | - | - | - | - |
| NU-1040 M | - | - | - | - | - | - | - | - |
| 1209-K | - | - | - | - | - | - | 349.25 mm | - |
| NUTR-25 P/5 | - | - | - | - | - | - | - | - |
| 22315 M C/3 | - | - | - | - | - | - | - | - |
| NU-230 C/4 | - | - | - | - | - | - | - | - |
| 6214 P/6 C/4 | - | - | - | - | - | - | - | - |
| I-71220 | - | - | - | - | - | - | - | - |
| ZARN-50110 | - | - | - | - | - | - | - | - |
| K-28 X 33 X 13 | - | - | - | - | - | - | - | - |
| NJ-306E M C/3 | - | - | - | - | - | - | - | - |
| 81207 | - | - | - | - | - | - | - | - |
| NJ-408 C/3 | - | - | - | - | - | - | - | - |
| K-35 X 42 X 22 | - | - | - | - | 62 mm | - | - | 46 mm |
| KA-35 ARO | - | - | - | - | - | - | 466.725 mm | - |
| 22234-KM C/3 | mm | - | 5 mm | 316 mm | - | - | - | - |
| K-100 X 107 X 21 | - | - | - | - | - | - | - | - |
| 20308 | - | - | - | - | - | - | - | 290 mm |
| 6304-ZZ | - | 87.313 mm | - | - | - | - | - | - |
| KD-90 XPO | - | - | - | - | - | - | - | - |
| 6313-2RSNR C/3 | - | - | - | - | - | - | - | - |
| 32940 P/6 | - | - | - | - | - | - | - | - |
| 21313E C/3 | - | 45.244 mm | - | - | - | - | 419.1 mm | - |
| 6208 M P/6 | - | - | - | - | - | - | - | - |
| NKI-20/20 | - | - | - | - | - | - | - | - |
| 6084 M | - | - | - | - | - | - | - | - |
| W-1 5/8 | - | - | - | - | - | - | - | - |
| N-321E | - | - | - | - | - | - | - | - |
| 6307-2RSNR P/6 | - | - | - | - | - | - | - | - |
| QJ-311 C/3 | - | - | - | - | - | - | 349.25 mm | - |
| HK-2518-RS | - | - | - | - | - | - | - | - |
| 29415 M | - | - | - | - | - | - | - | - |
| AXK-0821 | - | - | - | - | - | - | - | - |
| 20209-K | 16.7 mm | - | - | - | - | - | - | - |
| NU-436 M | - | - | - | - | - | - | - | - |
| 6206-ZZNR C/2 | - | - | - | - | 2.381 mm | - | - | 136.525 mm |
| 22318 M F80 C/4 | - | - | - | - | - | - | - | - |
| KD-75 CPO | - | - | - | - | - | - | 83 mm | 47.6 mm |
| 6015 | - | - | - | - | - | - | - | - |
| N-238 M | - | - | - | - | - | - | - | - |
| 6215-ZZN C/3 | - | - | - | - | - | - | - | - |
| 93316 | - | - | - | - | - | - | - | - |
| 6220-ZNR C/3 | - | - | - | - | - | - | - | - |
| NJ-2216 | - | - | - | - | - | - | - | - |
| NJ-2236 M C/3 | 22.3 mm | - | - | - | - | - | - | - |
| K-28 X 35 X 27 | - | - | - | - | - | - | - | - |
| NKI-50/25 | - | - | - | - | - | - | - | - |
| FR-290/7 | - | - | - | 316 mm | - | - | - | - |
| 1-1/2X1-9/16X1-1/4 | - | - | - | - | - | - | - | - |
| 63/28 NR C/3 | - | - | - | - | - | - | - | - |
| 16100-ZZ C/2 | - | - | - | - | - | - | - | - |
| 23220E M C/3 | - | - | - | - | - | - | - | - |
| 61817-ZZ | - | - | - | - | - | - | - | - |
| HK-3516 | - | - | - | - | 20.688 mm | - | - | - |
| 23034E-KM C/3 | - | - | - | - | - | - | - | - |
| 23028E-K C/4 | - | - | - | - | - | - | - | - |
| 6215 M | - | - | - | - | - | - | - | - |
| NA-4822 P/5 | - | - | - | - | - | - | - | - |
| NJ-426 M C/3 | - | - | - | - | - | - | - | - |
| 6204-ZZNR C/3 | - | - | - | - | - | - | - | - |
| NU-2310E M C/3 | - | - | - | - | - | - | - | - |
| LS-6085 | - | - | - | - | - | - | - | - |
| 309 C/2 | - | - | - | - | - | - | - | - |
| 6213 T P/5 | - | - | - | - | - | - | - | - |
| 3312-DA M | - | - | - | - | - | - | - | - |
| 5238 WB | - | - | - | - | - | - | - | - |
| 23926E M C/3 | - | - | - | - | 33.094 mm | 41.5 mm | - | - |
| E-12 | - | - | - | - | - | - | - | - |
| N-304E M | - | - | - | - | - | - | - | - |
| 32013 X P/6 | - | - | - | - | 46.93 mm | 66.675 mm | - | - |
| 7310 B | - | - | - | - | - | - | - | - |
| NA-6919 P/5 | - | 51.594 mm | - | - | - | - | 511.175 mm | - |
| NATV-40 | - | - | - | - | - | - | - | - |
| 22222E | - | - | - | - | - | - | - | - |
| RMS-14 | - | - | - | - | - | - | - | - |
| N-207 M P/5 C/3 | - | - | - | - | - | - | - | - |
| 31311 P/6 | - | - | - | - | - | - | - | - |
| 54309-U | - | - | - | - | 101 mm | - | - | - |
| NU-228E M C/3 | - | - | - | - | - | - | - | - |
| NU-312E C/4 | - | - | - | - | - | - | - | - |
| 6304 C/3 | - | - | - | - | - | - | - | - |
| 23320 M F80 C/4 | - | - | - | - | - | - | - | - |
| 6217-ZNR | - | - | - | - | - | - | - | - |
| N-317 M C/3 | - | 28.575 mm | - | - | - | - | - | - |
| 1218-K C/3 | - | - | - | - | - | - | - | - |
| 32218 P/5 | - | - | - | - | 32.436 mm | - | - | - |
| 5208 NR | - | - | - | - | - | - | - | - |
| KU-50 CPO-2RS | - | - | - | - | - | - | - | - |
English
BEARING-MALAYSIA SDN.BHD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
CONSOLIDATED BEARING KU-50 CPO-2RS Single Row Ball Bearings
1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 1.189 Inch | 30.2 Millimeter CONSOLIDATED BEARING 5208 NR Angular Contact Ball Bearings
CONSOLIDATED BEARING 32218 P/5 Tapered Roller Bearing Assemblies
CONSOLIDATED BEARING 1218-K C/3 Self Aligning Ball Bearings
3.346 Inch | 85 Millimeter x 7.087 Inch | 180 Millimeter x 1.614 Inch | 41 Millimeter CONSOLIDATED BEARING N-317 M C/3 Cylindrical Roller Bearings