CONSOLIDATED BEARING 88508 Single Row Ball Bearings

Fatigue load limit Pu:11.4 kN; Calculation factor Y:0.8; Calculation factor Y0:0.45; Ca min.:4 mm; Cb min.:10 mm; Da min.:72 mm; Da max.:86 mm; Basic dynamic load rating C:108 kN; Dimension series:53000; T:30.958 mm;

D:52.0000 mm; Grease Speed Rating n1:8500 rpm; Oil Speed Rating n2:12000 rpm; Basic Dynamic Radial Load Rating C:23800 N; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:20000 N; Sealed Speed Rating n3:8500 rpm; B:22.20 mm; d:20.000 mm; Accessories:One Seal;

L:711.2 mm; H2:79.375 mm; Appropriate attachment bolt size G:1.25 in; A1:190.5 mm; R2:42.069 mm; Cap bolt recommended tightening torque:1735.4 N·m; ba:78.581 mm; Housing:SAFS 538; S:4.763 mm; P150°:136 kN;

Accessories:One Seal & Snap-Ring; Oil Speed Rating n2:9500 rpm; D:62.0000 mm; Grease Speed Rating n1:7000 rpm; Basic Static Radial Load Rating Co:28000 N; Sealed Speed Rating n3:7000 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:30200 N; B:23.80 mm; d:30.000 mm;

K:4 mm; Calculation factor kr:0.2; Basic dynamic load rating C:297 kN; B:45 mm; Reference speed:1200 r/min; Basic static load rating C0:695 kN; E:214.1 mm; D:225 mm; Limiting speed:1500 r/min; ra max.:1 mm;

Oil level, min.:48 mm; L:560 mm; Appropriate attachment bolt, size G:24 mm; P55°:2700 kN; P120°:1000 kN; Ca:124 mm; H1:190 mm; Oil level, max.:61 mm; Q180°:900 kN; A2:255 mm;

R1:95.25 mm; P180°:96.1 kN; N1:28.575 mm; da:136.525 mm; Cap bolt:4 x 3/4-10 UNC; S:4.763 mm; R2:39.688 mm; L:539.75 mm; RG:3/4 NPT; Max. speed for Taconite seal:590 r/min;

b:22.3 mm; da min.:371 mm; Basic dynamic load rating C:4515 kN; Calculation factor Y0:2.2; G1:35 mm; D1 ≈:524 mm; d2 ≈:418 mm; B:192 mm; r1,2 min.:5 mm; Reference speed:750 r/min;

Fillet Radius ra:3.00 mm; d:110.000 mm; Sealed Speed Rating n3:1500 rpm; Oil Speed Rating Open/Shielded n2:2600 rpm; Basic Dynamic Radial Load Rating C:270000 N; Basic Static Radial Load Rating Co:260000 N; B:70.00 mm; D:320.0000 mm; Grease Speed Rating Open/Shielded n1:2100 rpm; Accessories:Two Sea

Taconite seal:TER 138; J min.:492.125 mm; RG:3/4 NPT; R2:37.306 mm; Appropriate attachment bolt size G:1 in; H:360.363 mm; Cap bolt:4 x 3/4-10 UNC; P120°:85.9 kN; P180°:92.5 kN; A1:171.45 mm;

d:40.000 mm; B:15.00 mm; Oil Speed Rating n2:12000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:14600 N; Grease Speed Rating n1:9500 rpm; D:68.0000 mm; Fillet Radius rb:0.30 mm; Basic Dynamic Radial Load Rating C:19500 N;

D:225 mm; with tapered bore:1 600 min-1; d:140 mm; with cylindrical bore:1 300 min-1; Static (Cor):8.3 mm; Grease:865 kN; Dynamic (Cr):4.5 mm; B:68 mm; Pu:540 kN; rs (min):2.1 mm;

Grease Speed Rating n1:2800 rpm; B:63.50 mm; Oil Speed Rating n2:3800 rpm; Fillet Radius ra:2.00 mm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:153000 N; Accessories:One Shield; d:70.000 mm; Basic Static Radial Load Rating Co:125000 N; Sealed Speed Rating n3:2800 rpm;

Accessories:One Shield; B:11.00 mm; d:15.000 mm; Basic Dynamic Radial Load Rating C:8250 N; Oil Speed Rating Open/Shielded n2:20000 rpm; D:35.0000 mm; Grease Speed Rating Open/Shielded n1:16000 rpm; Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:5100 N;

RG:3/8 NPT; J min.:431.8 mm; Appropriate attachment bolt size G:1 in; ba:77.787 mm; P90°:138 kN; PG:1/4 NPT; End plug (suffix Y):EPR 16; Taconite seal:TER 127; Cap bolt, SAE grade:5; Mass pillow block:92.5 kg;